活性炭纤维上4-氯酚及焦化废水尾水的O3催化氧化降解实验研究

选择YT-1000型活性炭纤维（ACF）作为催化剂，考察ACF与O₃协同作用催化降解水溶液中4-氯酚的最佳反应条件，并将该条件应用于焦化废水生物处理尾水中难降解有机污染物的催化氧化。ACF表面具有丰富的微孔结构，对4-氯酚有良好的吸附作用，在动力学上提高了其与O3反应的起始浓度，并且在ACF表面含氧、含氮等基团的催化作用下发生氧化反应，1 L浓度为100 mg/L的4-氯酚水样中投加2 g ACF反应6 min时，吸附作用对TOC的去除率为43.4%，而ACF协同O₃作用时的TOC去除率提高到72.5%，协同增效作用为67.1%；在选定的反应条件下，ACF协同O₃降解焦化废水生物处理尾水，60 min时的TOC与色度的去除率分别达到56.8%和96.3%。上述研究过程证明了吸附作用与催化作用的协同能有效降解生物过程不能降解的焦化废水中惰性有机污染物。     

An attempt to recover economic losses from decadal changes in two lagoon systems of Sri Lanka through a newly patented mangrove product

Kahandamodara and Kalametiya are two estuarine lagoons located within about 12 km distance along the Southern coast of Sri Lanka. According to a socio-economic survey, both lagoons have been moderately to high saline water bodies and the latter was an important center of prawn fishery until the late 1960s. Two irrigation projects upstream (Udawalawe irrigation scheme and Muruthawela Wewa), which came into operation in 1967 and 1968 respectively, increased freshwater inflows to these two lagoons and altered flora, fauna, and water quality, with a decline of lagoon fishery as a result. At the same time, the increase in freshwater favorised the Mangrove Apple Sonneratia caseolaris to expand spontaneously. Following many hectares of vegetation increase of this species, our study focused on recovering the economic loss of fisheries decline by using new ethnobotanic information on this species. We found that the pulp of the fruit of the Mangrove Apple is tasty and can be used to prepare a fruit drink. However, it has not been commercialised, or even practiced widely at homes, due to the fact that numerous small seeds in the fruit release certain phenolic compounds when damaged, giving a bad colour and an astringent taste to the pulp. We developed a method to get the fruit pulp from the Mangrove Apple minimising the addition of phenolic compounds. This fruit pulp was then used to produce ice cream and fruit drinks, and the whole procedure has been patented in Sri Lanka for the favour of the local people. Apparently this is a novel mangrove product reported for the first time in mangrove ethnobotany. In addition, analysis of the fruit pulp of the S. caseolaris for nutritional composition revealed that it is very rich in phosphorus and dietary fiber, indicating that these new products may have an even higher potential as a supplementary food. Its use as a health food and as a commercialised eco-product is expected to bring new gains in spite of the former ecosystem and fishery decrease. It is however not known to which extent these novel ethnobiological/socio-economical uses outbalance functions lost by ecosystem degradation.     

纳米TiO_2纤维的制备及其光催化降解甲醛研究

以胶原纤维为模板制备纳米TiO2纤维用于光助催化降解甲醛气体,用扫描电镜(SEM)、X射线衍射(XRD)和N2吸附-脱附技术对纳米TiO2纤维进行了表征。结果表明,纳米TiO2纤维的比表面积为11.33 m2/g,晶型为锐钛矿型。在相同催化反应条件下纳米TiO2纤维对甲醛气体的催化降解率与商品纳米TiO(2Degussa P25)催化剂相当。纳米TiO2纤维的用量、甲醛气体初始浓度是影响催化效果的两个因素。当甲醛气体初始浓度为0.270 mg/m3,相对湿度为38%,气体流速0.1 L/min,纳米TiO2纤维用量为1.0 g时,甲醛的降解率达到96%。因此,纳米TiO2纤维可用于室内甲醛气体的催化降解。     

硫酸盐还原颗粒污泥对Cr的吸附机理解析

以硫酸盐还原颗粒污泥作为研究对象,进行Cr的吸附容量研究及吸附等温线拟合,测定颗粒污泥中的硫化物含量、对比实验前后颗粒污泥的表面形态和微生物组成并采用傅里叶红外变换光谱(FTIR)分析颗粒污泥的表面基团。结果表明,颗粒污泥对Cr的吸附容量为6.84 mg/g,吸附过程可用Langmuir吸附等温式描述。颗粒污泥中硫化物含量达9.868 mg/g(湿重),对应每克颗粒污泥对Cr的最大吸附量可达10.69 mg;颗粒污泥表面生长大量的微生物,以杆菌为主,颗粒污泥表面丰富的微孔结构及微生物所分泌的胞外物均可有效吸附溶液中的Cr;FTIR分析结果显示,颗粒污泥中包含大量C=O、C-N及-S等基团,这些基团均可通过与C(rⅥ)或C(rⅢ)之间的静电吸附作用吸附溶液中的Cr。研究表明化学与生物吸附作用在硫酸盐还原颗粒污泥吸附溶液中的Cr过程中起到了重要的作用。     

厌氧生物滴滤法脱除冷煤气中硫化氢的研究

水煤气中硫化氢在燃烧时会转变成二氧化硫,对环境产生污染。文章采用厌氧生物滴滤塔法对冷煤气进行脱硫处理。因煤气对氧的严格限制,通过设计生物滴滤塔,经挂膜驯化后在厌氧条件下对浓度在1~5 g/m3左右的硫化氢进行脱除处理,考察滴滤塔运行条件对脱除效果的影响。结果表明,生物挂膜25 d后,生物滴滤塔达到稳定,喷淋液pH值为2.23,ORP值为283 mV,溶解氧为0.4 mg/L,对溶液中硫离子氧化效率达到94%。滴滤塔在液气比0.15,空塔气速0.088 m/s,pH值5.0~7.0,填料高度为82 cm,塔温为25~30℃左右时,达到较优的运行条件,此时该滴滤塔对以CO、CO2、H2和1 940 mg/m3H2S组成的模拟水煤气的脱硫效率达91.2%。     

C/YAG复合材料的抗烧蚀性能研究

目的对C/YAG复合材料的烧蚀性能和烧蚀机理进行研究。方法以高固相含量Y_2O_3-Al_2O_3溶胶为原料,低成本的碳纤维针刺毡为增强体,通过浸渍-干燥-热处理工艺制备C/YAG复合材料,利用SEM和XRD对烧蚀后材料的微观结构和物相组成进行分析。结果复合材料的质量烧蚀率和线烧蚀率分别为0.05g/s和0.12 mm/s。结论 C/YAG复合材料高的质量烧蚀率和线烧蚀率主要归因于氧乙炔焰高热流和强剪切力作用。烧蚀后材料的微观形貌可以分为中心区、过渡区和边缘区三个区域。其中烧蚀中心区主要受到热化学腐蚀和机械剥蚀的作用,而过渡区和边缘区主要受到热化学腐蚀和热物理侵蚀的作用。     

一种新型"Turn-on"荧光探针用于硫化氢可视化检测

硫化氢(H2S)是表征水体污染的重要参数之一,对其进行快速、有效地检测十分重要.荧光检测法由于具有不可比拟的优势得到了广泛的关注.以2-(2'-羟基苯基)苯并咪唑为荧光团,基于H2S的亲核性,设计合成了一种新型检测H2S的荧光探针.该探针与H2S作用后,荧光强度随H2S浓度的增加逐渐增强,颜色由淡黄色变成紫色,因此能够进行可视化检测,可视化检测限为3μmol·L-1.探针的最佳激发/发射波长为320/460 nm,对H2S表现出了良好的选择性和很快的响应速度(5 min),在较宽的p H(6~9)范围内,仍然表现出较好的荧光性能,荧光检测限为6μmol·L-1.该探针为H2S的检测提供了新方法.     

Novel Biocomposites Sheet Molding Compounds for Low Cost Housing Panel Applications

Biocomposites were made by a novel high volume processing technique named biocomposite sheet molding compound panel (BCSMCP) manufacturing process. This process design was inspired by the commercial glass fiber–polyester resin composite fabrication method called sheet molding compounding (SMC). This process yields continuous production of biocomposites on a large scale, and thus can be easily adopted in industries. A unique fiber dispersion method, which enabled uniform distribution of natural fibers, was used in this process. Consistency of the process was tested by evaluating the repeatability of the resultant materials mechanical properties. The low cost biocomposites produced as a result of the processing will be used for various panel applications such as housing and transportation. The molded samples were tested for various mechanical and thermal properties, in accordance with ASTM procedures. The biocomposites were made with various natural fibers including, big blue stem grass, jute, and industrial hemp. By combining different natural fibers in varying mass fractions, hybrid biocomposites were made using this process. Grass fiber reinforced polyester biocomposites processed by the SMC line showed very promising results.     

Processing and Characterization of Short-Fiber Reinforced Jute/Poly Butylene Succinate Biodegradable Composites: The Effect of Weld-Line

Fabrication of complex injection molded parts often involves the use of multiple gates. In such situations, polymer melts from different gates meld to form the molded part (weld line). This paper reports on the fabrication and characterization of the mechanical and morphological properties of short fiber reinforced jute/poly butylene succinate (PBS) biodegradable composites. The effect of a dual gated mold in the fabrication of welded specimens was a key focus of the investigation. It was observed that incorporation of jute fiber (10 wt%) conferred drastic changes on the stress–strain properties of the matrix as the elongation at break (EB), dropped from 160% in the matrix to just 10% in the composite. The tensile strength of the composite was lower than that of the matrix. However, it is noteworthy that the tensile modulus of the composite increased. Bending test also revealed that both bending strength and modulus increased with the incorporation of jute. Morphological studies of the tensile fracture surface using SEM revealed two types of failure mode. Ductile failure was indicated by plastic deformation at the initiation of fracture followed by brittle failure. The good interfacial bonding indicated between jute and PBS was attributed to positive interaction between the two polar polymers. A comparison of the non-weld and weld-line samples revealed that the weld-line composites have better mechanical integrity than the corresponding polymer matrix with weld line. The results also revealed that elongation at break and toughness are most sensitive to the presence of the weld-line whereas flexural properties are least sensitive.     

Role of Amino Acids on <Emphasis Type="Italic">In Situ</Emphasis> Photografting of Jute Yarn with 3-(Trimethoxysilyl) Propylmethacrylate

To improve the mechanical performance of natural lignocellulosic jute yarn, grafting with [3-(trimethoxysilyl) propylmethacrylate] (TMSPM) monomer has been performed on in situ UV radiation and optimized the monomer concentration (30%) and irradiation time (30 min). Effect of various amino acids (1%) as additives in TMSPM with photografted jute yarn at optimized system has been studied. The polymer loading (PL) and tensile properties like tensile strength (TS) and elongation at break (Eb) of treated samples were enhanced by incorporation of amino acids and the highest properties (TS = 300% and Eb = 386%) achieved by the sample treated with l-Arginine (Arg) with 32.5% PL value. Weak acid like 3% acetic acid and inorganic acid like 1% sulfuric acid were also incorporated in the optimized system of TMSPM grafting and compared their effect on the tensile properties with amino acid treated samples. Water absorption and weathering resistance of treated and untreated samples were also performed and treated sample showed lesser water uptake as well as less weight loss and mechanical properties as compared to untreated samples.